8 97087078 0 Flange Splined Shaft Flange Yoke 8970870780 Isuzu NHR
4JA1
| Part No. | WW-4J063 |
| OEM No. | 8970331750 8 97033175 0 |
| Description | Oil Pumps |
| Model | 4JB1 NKR |
WW-4J063 8970331750 8 97033175 0 Oil Pumps 4JB1 NKR
More Parts:
| Part NO. | OEM NO. | Part Name | Model |
| WW-4J060 | 5970331750 | OIL PUMP | JMC4JB1 |
| WW-4J061 | 8970491460 | SEAL; OIL,CR/SHF,RR | NHR NKR |
| WW-4J062 | 8971233300 | PUMP ASM; WATER,W/GASKET | 4JA1 4JB1 |
| WW-4J063 | 8970331750 | PUMP ASM; OIL | NHR NKR |
| WW-4J064 | 8935521210 | OIL PIPE;OIL PUMP | NHR NKR |
| WW-4J065 | 8941337363 | PAN ASM; OIL | NHR NKR |
| WW-4J066 | 8941220513 | FOOT; ENG | NHR NKR |
| WW-4J067 | 8944836830 | PULLEY; CR/SHF | TFR54,NKR55 |
| WW-4J068 | 5532210271 | BRACKET; SUPPORT,ENG MTG,RR | NKR大 |
| WW-4J069 | 8941556530 | RUBBER; ENG FOOT,FRT | NHR NKR |
| WW-4J070 | 9512225180 | BACK PLATE;CYLINDER BLOCK | NHR NKR |
| WW-4J071 | 8920521020 | INLET CONNECTION | NHR NKR |
| WW-4J072 | 8973617700 | THERMOSTAT | 600P,NKR55 |
| WW-4J073 | 8941258511 | HOUSING; THERMOSTAT | NHR NKR |
| WW-4J074 | 8943685890 | PIPE; WATER OUTLET | NHR NKR |
| WW-4J075 | 9827202090 | UNIT; OIL PRESSURE | |
| WW-4J076 | 1002080BB0 | OIL SENSOR | NKR TRUCK |
| WW-4J077 | 8973086141 | CAP OIL TANK | 4JA1-T |
| WW-4J078 | 8973166020 | CLUTCH RELASE BEARING | NKR |
| WW-4J079 | 8979431830 | SENSOR OIL TANK | 4JA1 4JA1T |
| WW-4J080 | 8979441500 | FAN COOLING | 4JA1 4JA2T |
| WW-4J081 | 3601400010 | SENSOR CRANKSHAFT | 4JA1 4JA3T |
| WW-4J082 | 8941337460 | OIL PIPE;INJECTOR PUMP | NKR |
| WW-4J083 | 8943616830 | PUMP ASM; INJ | NHR NKR |
| WW-4J084 | 1111300 | INJECTOR PUMP | NHR NKR |
| WW-4J085 | 8942393720 | VALVE;MAGNET | NKR |
| WW-4J086 | 8942373920 | SOLENOID SWITCH | NKR |
| WW-4J087 | 8941523530 | HOSE; FUEL,NOZZLE TO NOZZL | NHR NKR |
| WW-4J088 | 1112100 | INJECTOR ASSY | NHR NKR |
| WW-4J089 | 8971470340 | SEAL; OIL,INJ PUMP | NKR,NHR |
| WW-4J090 | 8941394650 | HOLDER ASM; NOZZLE | NHR NKR |
| WW-4J091 | 1112100 | INJECTOR ASSY | NHR NKR |
| WW-4J092 | DLLA154P001 | NOZZLE | NHR NKR |
| WW-4J093 | DSLA153P0090 | NOZZLE | NHR NKR |
| WW-4J094 | 1303050AD0 | INLET PIPE;CYLINDER | NHR NKR |
| WW-4J095 | 8941401150 | PLUG; GLOW | 600P NKR55 |
Oil Pump
The oil pump is an internal combustion engine part that circulates
engine oil under pressure to the rotating bearings, the sliding
pistons and the camshaft of the engine. This lubricates the
bearings, allows the use of higher-capacity fluid bearings and also
assists in cooling the engine.
Can you tell if your fuel pump is going bad?
Usually, a bad or failing fuel pump will produce one or more of the
following 8 symptoms that alert the driver of a potential issue. 1.
Whining Noise From the Fuel Tank. One of the first symptoms of a
problem with the fuel pump is a loud whining sound. An old or worn
fuel pump may produce a noticeably loud whine or howl while
running.
What is the Isuzu a-4j engine?
This illustration is based on the A-4JA1 engine. The A-4J Series of
industrial engines features the unique ISUZU troidal square
combustion chamber. Thisdesign provides superior fuel economy for a
wide range. Auto-thermatic pistons with cast steel struts are used
to reduce thermal expansion and resulting enginenoise when the
engine is cold.
What is the engine type of a-4ja1?
GENERAL INFORMATION MAIN DATA AND SPECIFICATIONS Engine Model
A-4JA1 A-4JB1 4JB1T Item Engine type Water cooled, four-cycle,
in-line, overhead valve Combustion chamber type Direct injection
Cylinder liner type No. of cylinders - Bore x Stroke mm(in.) 4 -
93.0 x 92.0 4 - 93.0 x 102.0.
What is the Isuzu troidal square combustion chamber?
The A-4J Series of industrial engines features the unique ISUZU
troidal square combustion chamber. This design provides superior
fuel economy for a wide range. Auto-thermatic pistons with cast
steel struts are used to reduce thermal expansion and resulting
engine noise when the engine is cold.
Auto parts suitable for Japanese Trucks : CYZ51K 6WF1 / FVR34 6HK1 / FSR33 6HH1 / NPR75 4HK1 / NLR85 4JJ1 /
NPR71 4HG1 / NPR66 4HF1 / QKR55 4JB1 / NKR55 4JB1 / DMAX / HINO
700/500 / 300 E13C /J08/J05 / N04C etc.
FAQ
1.Q:What is your terms of payment?
A:T/T 30% as deposit, and 70% before delivery. We will send you the
packing list and the photos of the products before your payment.
2.Q:Do you have MOQ request?
A: We don’t have MOQ request. We are wholesaler for ISUZU Truck
spare parts, we have a large stock of products.
3.Q: What is the delivery time?
A: The delivery is depends on the storage. If the items we have in
stock, we can make delivery within 7days. For the items need to be
ordered the delivery is betwen20-45 days.
4.Q.:Can you produce according to the samples?
A: Clients’sample is welcome. We are able to produce the specific
products according to your sample.
5.Q: Can l get a lower price if l order large quantities?
A: Yes, cheaper prices with bigger amount of order.
